DynoDrive Roller Conveyor | Powered Roller Conveyors

Features, Benefits & Uses

Features & Benefits

• No product damage – 24v Zero Pressure Accumulation (ZPA) ensures product moves along and accumulates without touching.
• Flexibility – externally mounted 24v drive motor means it can easily adapt to a variety of roller sizes and conveyor widths including retrofits.
• Maintenance friendly – reduced wear on shaft and bearings with minimal parts required.
• Energy efficient – direct drive 24v brushless DC motor which only runs when product needs to move.
• Controlled braking system
• Simple – no need for PLC
• Impressive torque at low speeds
• Quiet – very low operational noise

Uses

•  Warehousing
• Food dispatch and packing
• Manufacturing

How it works

• A Dynodrive motor is fitted at regular intervals along the length of the conveyor, this enables the loads to be automatically controlled in ‘zero pressure zones’.
• The stop / start action of these motors is automatically controlled by photocell sensors fitted at each end of the zone, these send information to the control card link to that motor.
• As the loads are conveyed along the conveyor, the photocell sensors inform the control card that product is present. The control card then checks that the forward zone is unoccupied. If the zone is clear, the downstream motor starts thus enabling the product to be passed forward where the action is repeated.
• If however, the downstream zone is occupied then the control card stops the motor immediately under the product until the downstream zone is clear.
• In the event that no loads are present or moving on the conveyor, then zones are stopped effectively saving energy.