The DynoDrive One is built for system integrators and operations teams that need maximum flexibility. Externally mounted, it pairs with common industry controllers – including ZoneLogix, Pepperl+Fuchs, Interroll, and Bihl+Wiedemann – via a simple M8 connector. One motor handles virtually any conveyor width, dramatically reducing your spare parts inventory.

✓ High starting torque: 2.8 Nm (25 lbf-in) – handles heavy unit loads with ease
✓ Gearless direct drive – no failure-prone gear reducers or linkages
✓ Up to 200,000-hour bearing life – calculated for a 24/7 operation
✓ NoFault output – real-time diagnostics fed directly to your control system
✓ Retrofits into existing conveyor frames without structural changes
✓ Operating range: -4°F to 122°F (-20°C to 50°C)

The DynoDrive Core shares the pancake-style architecture of the One but is engineered for greater output versatility – available from 25W to 120W to suit specific load requirements. Ideal for warehousing, food dispatch, manufacturing lines, and incline/decline conveyors where load demands vary across zones.

✓ Rated output 25W to 120W – match the motor to the application
✓ Up to 250,000-hour bearing life at low operating speeds
✓ Direct drive efficiency – no gear reducers, no failure modes from gearboxes
✓ Compatible with the full ZoneLogix controller family
✓ Easy external access for rapid inspection and replacement

When you need high torque at low speeds in a tight space, the DynoDrive Cube delivers. It integrates a 24V DC brushless motor with a high-efficiency right-angle gear reducer into a sealed, maintenance-free unit that fits within a 7″ (180mm) cube. It replaces AC gearmotors at a fraction of the operating cost – with built-in ZPA logic that doesn’t require a central PLC.

✓ Torque range 4.5 to 36.1 Nm across gear ratio options — massive range
✓ Sealed lubrication – zero scheduled maintenance
✓ Design life 150,000 to 250,000 hours
✓ Smart Conveyor Control mode – built-in ZPA without PLC programming
✓ Direct drop-in replacement for AC gearmotor applications
✓ Dimensions: 6″ x 6.5″ x 7.25″ (152 x 165 x 184 mm)

DynoChain is a complete chain conveyor system manufactured from Acetal with a no-wear strip and ultra-low coefficient of friction. It handles challenging products and harsh environments that would wear out standard conveyor materials – and it does it quietly, with minimal lubrication and exceptional service life. Available in 3-inch pitch (Dyno 300) or 2.5-inch pitch (Dyno 600). Food-grade certified for direct food contact.

✓ Food-grade certified — safe for direct food contact
✓ Non-corrosive, UV-resistant, and water-resistant — outdoor and wash-down ready
✓ Runs in any direction — straight, curves, and inclines
✓ Low coefficient of friction for smooth, quiet product movement
✓ Ideal for fruit grading, crate transfer, pallet transfer, crate washing, and elevators
✓ Replacement DynoChain components available for ongoing maintenance

Miniroll is a complete gravity wheel track conveyor system for live racking, FIFO storage, and picking operations. No power needed — install it in minutes and product starts flowing. Simple, robust, and cost-effective.

✓ Live racking, FIFO, and picking applications
✓ Single or double track for varied product sizes
✓ Full accessories: non-return, braking ramp, mounting clips, joiners
✓ Galvanized steel frame built for warehouse conditions
✓ No power required — zero operating cost

High-quality conveyor roller bearings for demanding duty cycles. Available in a range of sizes including imperial specifications to fit existing equipment without modifications.

✓ Precision-engineered for long service life
✓ Suited to high-cycle, high-load applications

Sprockets and pulleys for chain and belt-driven systems. Available in multiple tooth counts and bore sizes, matched to standard pitches.

✓ Multiple tooth counts and bore configurations
✓ Reliable power transfer with minimal wear
✓ Suited to both chain and belt drive setups

The complete range of replacement and build components for DynoChain conveyor systems – engineered to the same spec as the original, sourced from one place!

✓ System-matched for consistent performance
✓ Full range for new builds and ongoing maintenance
✓ Available for both Dyno 300 (3″) and Dyno 600 (2.5″) pitch

Essential replacement parts and modules for Tranzband belt conveyor systems. These components ensure smooth operation and reliable tracking for lightweight to medium-duty material handling.

✓ Optimized for high-speed belt tracking
✓ Durable drive and idler rollers for consistent tension
✓ Compatible with standard Tranzband frame configurations

Multiroll is a system of ball transfers, multi-directional rollers (MTR), and specialized castors for moving and redirecting product in any direction with minimal effort. The go-to solution for transfer tables, merge points, and packing stations.

✓ Ball transfers for smooth omni-directional movement
✓ MTR multi-directional rollers (MTR50, MTR60, MTR80)
✓ Dynofloat polyurethane and rubber options for sensitive products
✓ Glass castors for specialist applications
✓ Mix and match components to build the exact system you need